Recently, we successfully shipped an ultrapure water filtration system. And it will arrive in Phuket, a famous tourist destination in Thailand. This equipment will be used in the medical, electronics manufacturing and tourism supporting industries.
Why use ultrapure water filtration system?
As a tropical island, Phuket boasts abundant marine resources, but freshwater resources are relatively scarce. Furthermore, factors such as surging water demand during peak tourist season and stringent water standards for certain industries place even higher demands on the supply of high-quality pure water.
We custom-designed the 1000L/hour ultrapure water filtration system shipped this time. It based on Phuket’s climate, raw water quality data, and actual local customer applications. Its energy-saving design reduces energy consumption by approximately 15% compared to traditional pure water equipment.
How does ultrapure water filtration system?
그만큼 EDI 시스템 본 설비는 전처리 시스템, 2단계 역삼투압, 전기이온화를 포함한 다단계 정화 공정을 활용합니다. 원수에서 침전물, 콜로이드, 미생물, 중금속 이온, 용존 유기물을 효과적으로 제거할 뿐만 아니라, 물의 저항률을 18.2MΩ·cm 이상으로 향상시킵니다. 이 설비는 의료기기 세척, 전자 부품 생산 냉각, 고급 호텔 객실용수 등 최고 수준의 수질 기준을 완벽하게 충족합니다. 또한, 푸껫의 고온다습한 환경을 고려하여 전체 시스템을 내식성 304 스테인리스강으로 제작하고, 핵심 부품은 방습 및 산화 방지 처리를 했습니다.
What is the workflow of the EDI system?
We can divide our EDI equipment workflow into four steps.
Firstly, the raw water pretreatment stage
A multi-media filter removes large particles of impurities such as silt and rust from the raw water. An activated carbon filter then absorbs residual chlorine and organic matter. Finally, a safety filter removes fine suspended solids to prevent subsequent membrane element clogging.
Secondly, primary reverse osmosis treatment
The pretreated water enters the primary reverse osmosis membrane. Under high pressure, water molecules pass through the membrane and become primarily pure water, while the membrane retains and discharges contaminants such as salts and heavy metal ions. This initial improvement in water purity results in the removal of over 97% of dissolved solids.
Thirdly, secondary reverse osmosis treatment
The primary reverse osmosis product water enters the secondary reverse osmosis membrane, where we further filter it to remove trace salts, organic matter, and other impurities—this raises the water resistivity to 1-10 MΩ·cm. This treatment meets the basic pure water requirements of most industrial processes while reducing the load on subsequent EDI processing.
Finally, the EDI deep desalination stage
The secondary reverse osmosis product water enters the EDI module, where an electric field causes the remaining ions in the water to migrate to the corresponding electrodes and removes them. Without the need for regeneration chemicals, we can increase the resistivity of water to over 18.2MΩ・cm, and ultimately produce ultrapure water.
How to transport ultrapurewater filtration system?
From the moment the EDI 시스템 leaves the factory until it arrives at the customer’s site in Phuket, we use shock-resistant packaging, including wooden crates, bubble wrap, and stretch film. The crates are custom-sized, and the equipment is secured to a dedicated transport vehicle during transportation to prevent damage to components caused by bumps during transit.
We fully document the entire process, from order placement to delivery, which eliminates the need to worry about delayed delivery. After customs clearance at the port, the equipment is shipped directly to Thailand by ship, with merchandisers tracking the shipment’s progress in real time. Upon arrival at the Thai port, we will transport it directly to the installation site in Phuket by road. The entire transportation process is efficient and safe, ensuring on-time delivery of the equipment.
Which field uses this device?
- In the medical field, high-quality ultrapure water is used for cleaning and disinfecting hospital operating room instruments, as well as for laboratory testing and analysis.
- In the electronics manufacturing sector, this equipment will provide companies with a stable supply of pure water, breaking the water quality bottleneck in the electronics industry.
- 또한 관광 관련 시설에서는 심층 정화가 물의 맛과 청결도를 향상시켜, 관광객들에게 한층 더 품격 있는 주거 경험을 제공합니다.
요약
This equipment has solved water treatment challenges in Phuket, Thailand, for the medical, electronics manufacturing, and tourism industries. It represents a valuable example of cooperation between China and Thailand in environmental protection technology and industry.
앞으로도 저희 EDI 기술의 지속적인 혁신과 고도화를 바탕으로, 더욱 우수한 품질의 수처리 장비들이 세계 시장에 진출하게 될 것입니다. 이는 초순수 여과 시스템뿐만 아니라 역삼투, 해수 담수화, 한외여과 장비 분야의 발전 또한 견인할 것입니다. 이러한 장비가 필요하시다면 언제든지 저희에게 연락해 주십시오.
